| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8/3028F bảng dữ liệu(PDF) 271 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8/3028F bảng dữ liệu(HTML) 271 Page - Renesas Technology Corp |
|
271 / 923 page ![]() Rev. 2.00, 09/03, page 241 of 890 7.5 Interrupts The DMAC generates only DMA-end interrupts. Table 7.13 lists the interrupts and their priority. Table 7.13 DMAC Interrupts Description Interrupt Short Address Mode Full Address Mode Interrupt Priority DEND0A End of transfer on channel 0A End of transfer on channel 0 High DEND0B End of transfer on channel 0B — DEND1A End of transfer on channel 1A End of transfer on channel 1 DEND1B End of transfer on channel 1B — Low Each interrupt is enabled or disabled by the DTIE bit in the corresponding data transfer control register (DTCR). Separate interrupt signals are sent to the interrupt controller. The interrupt priority order among channels is channel 0 > channel 1 and channel A > channel B. Figure 7.25 shows the DMA-end interrupt logic. An interrupt is requested whenever DTE = 0 and DTIE = 1. DTE DTIE DMA-end interrupt Figure 7.25 DMA-End Interrupt Logic The DMA-end interrupt for the B channels (DENDB) is unavailable in full address mode. The DTME bit does not affect interrupt operations. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |