| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
HD64F7047 bảng dữ liệu(PDF) 298 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD64F7047 bảng dữ liệu(HTML) 298 Page - Renesas Technology Corp |
|
298 / 764 page ![]() Rev. 2.00, 09/04, page 258 of 720 10.7 Usage Notes 10.7.1 Module Standby Mode Setting MTU operation can be disabled or enabled using the module standby register. The initial setting is for MTU operation to be halted. Register access is enabled by clearing module standby mode. For details, refer to section 24, Power-Down Modes. 10.7.2 Input Clock Restrictions The input clock pulse width must be at least 1.5 states in the case of single-edge detection, and at least 2.5 states in the case of both-edge detection. The TPU will not operate properly at narrower pulse widths. In phase counting mode, the phase difference and overlap between the two input clocks must be at least 1.5 states, and the pulse width must be at least 2.5 states. Figure 10.43 shows the input clock conditions in phase counting mode. Overlap Phase differ- ence Phase differ- ence Overlap TCLKA (TCLKC) TCLKB (TCLKD) Pulse width Pulse width Pulse width Pulse width Notes: Phase difference and overlap Pulse width : 1.5 states or more : 2.5 states or more Figure 10.70 Phase Difference, Overlap, and Pulse Width in Phase Counting Mode |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |