| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8/3021 bảng dữ liệu(PDF) 438 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8/3021 bảng dữ liệu(HTML) 438 Page - Renesas Technology Corp |
|
438 / 712 page ![]() 12. Smart Card Interface Rev.2.00 Mar. 22, 2007 Page 414 of 684 REJ09B0352-0200 Serial Data Reception: Data reception in Smart Card mode uses the same processing procedure as for the normal SCI. Figure 12.6 shows an example of the transmission processing flow. [1] Perform Smart Card interface mode initialization as described above in Initialization. [2] Check that the ORER flag and PER flag in SSR are cleared to 0. If either flag is set, perform the appropriate receive error processing, then clear both the ORER and the PER flag to 0. [3] Repeat steps [2] and [3] until it can be confirmed that the RDRF flag is set to 1. [4] Read the receive data from RDR. [5] When receiving data continuously, clear the RDRF flag to 0 and go back to step [2]. [6] To end reception, clear the RE bit to 0. Initialization Read RDR and clear RDRF flag in SSR to 0 Clear RE bit to 0 Start reception Start Error processing No No No Yes Yes ORER = 0 and PER = 0 RDRF=1? All data received? Yes Figure 12.6 Example of Reception Processing Flow |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |