| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/20203 bảng dữ liệu(PDF) 181 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/20203 bảng dữ liệu(HTML) 181 Page - Renesas Technology Corp |
|
181 / 992 page ![]() Section 6 Power-Down Modes Rev. 1.00 Oct. 03, 2008 Page 155 of 962 REJ09B0465-0100 LPCR1 PSCSTP = 0 LPCR1 PSCSTP = 1 Function Active Mode Sleep Mode Active Mode Sleep Mode Standby Mode IIC2/SSU Functioning Functioning Retained Retained Reset Peripheral modules A/D converter_1, A/D converter_2 Functioning Functioning Retained* 4 Retained* 4 Reset D/A converter Functioning Functioning Functioning Functioning Reset Notes: 1. The timers are stopped if φ/2 to φ/8192 is selected as the clock source of the event- generation timer. 2. The timers operate if φ is selected as the count clock. The timers are stopped if φ/2 to φ/8192 is selected as the count clock. 3. The WDT operates if the low-speed OCO is selected as its clock source. 4. The A/D converters operate when A/D conversion time = 43 states (max) is selected. The A/D converters are retained when the other conversion time is set. 6.2.1 Active Mode In active mode, the CPU, DTC, and all the on-chip peripheral modules operate on the system clock φ. The system clock frequency can be selected from among φbase, φbase/2, φbase/4, φbase/8, φbase/16, φbase/32, φbase/64, and φbase/128 according to the PHI[2:0] setting in LPCR2. 6.2.2 Sleep Mode When a SLEEP instruction is executed in active mode with the SSBY bit = 0 in LPCR1, a transition to sleep mode is made. In sleep mode, the CPU is stopped but the DTC and all the on- chip peripheral modules operate on the system clock. CPU register contents are retained. When an interrupt is requested, sleep mode is canceled causing a transition to active mode and interrupt exception handling starts. Sleep mode cannot be canceled if the I bit in CCR is 1 or the requested interrupt is masked by the interrupt enable bit. After sleep mode is canceled, the high- speed or low-speed clock is selected as the system clock source depending on the SLEEPRS bit setting in LPCR1. When the RES pin is driven low or any other internal reset occurs, sleep mode is canceled causing a transition to the reset state. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |