| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/20203 bảng dữ liệu(PDF) 173 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/20203 bảng dữ liệu(HTML) 173 Page - Renesas Technology Corp |
|
173 / 992 page ![]() Section 6 Power-Down Modes Rev. 1.00 Oct. 03, 2008 Page 147 of 962 REJ09B0465-0100 Section 6 Power-Down Modes In addition to normal active mode, this LSI can enter either of the two power-down modes after release from a reset, in which power consumption is reduced. As other measures for reduced power consumption, this LSI also has a bus-master-clock division function for the low-speed- operation of bus masters, module standby function which allows the selective stopping of on-chip peripheral modules, and a PSC-divider stopping function. Further power consumption is possible by selecting the low-speed on-chip oscillator clock φloco, or sub-oscillator clock φsub as the source of the system clock φ to operate the LSI at a low speed. After release from a reset, all of the peripheral functions except timer RE are in the module standby state. Make the settings for the operation of module in the corresponding registers after the module standby state is released. • Active Mode The CPU and on-chip peripheral modules operate on the system clock φ. The system clock frequency can be selected from among φbase to φbase/128, where φbase is the system base clock. • Sleep Mode The CPU is stopped. On-chip peripheral modules operate on the system clock φ. • Standby Mode The CPU and all the on-chip peripheral modules are stopped. However, timer RE (TMRE) can operate when the realtime clock mode is selected. The watchdog timer (WDT) also operates when the low-speed OCO is selected as the WDT clock source. • Bus Master Clock Division Function For the bus masters CPU and DTC, ROM, and RAM, the operating clock φs can be divided independently of the clock supplied to the peripheral modules. The bus master clock φs can be selected from among φ to φ/32. • PSC Divider Stop Function The PSC divider can be stopped through software setting. Specifically, the peripheral modules using φ/2 to φ/8192 are stopped (register values are retained), whereas the ones using φ remain operating. • Module Standby Function Power consumption can be reduced by halting individual on-chip peripheral modules that are not in use. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |