| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/20203 bảng dữ liệu(PDF) 418 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/20203 bảng dữ liệu(HTML) 418 Page - Renesas Technology Corp |
|
418 / 992 page ![]() Section 12 Event Link Controller Rev. 1.00 Oct. 03, 2008 Page 392 of 962 REJ09B0465-0100 (6) Operation of Port Buffer Registers (a) Input Port-Groups When an event is input to an input port-group, the signal value of the external pin of the bit specified as the members of the input port-group is transferred to PDBF. If another event is input to the input port-group in this state, the current PDR value is transferred or not depending on the PGCOVE bit setting in PGC as described below. • PGCOVE = 0 (overwriting PDBF is disabled) If the PDBF value that has been transferred upon the latest event input has already been read by the CPU (or transferred by the DTC), the signal value of the external pin is transferred to PDBF. If not read, the signal value of the external pin is not transferred and the input event is invalid. • PGCOVE = 1 (overwriting PDBF is enabled) When another event is input to an input port-group, the signal value of the external pin is transferred to PDBF. (b) Output Port-Groups If an output port-group is specified so that it should output the PDBF value, the PDBF value is transferred to PDR when an event is input to the output port-group. In this case, only the values of the bits specified as the members of the output port-group are transferred If an output port-group is specified so that it should shift out the bit values in the group (PGCO bits = 1xx in PGC), the PDBF data is transferred to PDR, and then the PDR value is shifted bit by bit from MSB to LSB. The initial value to be output to the port-group should be provided in PDBF. Examples of operation are shown in figures 12.5 and 12.6. (7) Restrictions on Writing to PDR or PDBF by CPU When the ELCON bit in ELCR is set to 1, write access to the following registers is invalid. • If bits are specified as members of the input port-group and the event-linkage is set for the port-group, write access to the relevant bits in PDBF by the CPU is invalid. • If port bits are specified as members of the output port-group, write access to the relevant bits in PDR by the CPU is invalid. • If a port bit is specified as an output single-port and the event-linkage is set (by ELSR) for the port, write access to the relevant bit in PDR by the CPU is invalid. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |