| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/2456R bảng dữ liệu(PDF) 368 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2456R bảng dữ liệu(HTML) 368 Page - Renesas Technology Corp |
|
368 / 1376 page ![]() Section 7 DMA Controller (DMAC) Rev. 1.00 Sep. 19, 2008 Page 338 of 1342 REJ09B0467-0100 7.4.1 Activation by Internal Interrupt Request An interrupt request selected as a DMAC activation source can also simultaneously generate an interrupt request for the CPU or DTC. For details, see section 5, Interrupt Controller. With activation by an internal interrupt request, the DMAC accepts the interrupt request independently of the interrupt controller. Consequently, interrupt controller priority settings are irrelevant. If the DMAC is activated by a CPU interrupt source or an interrupt request that is not used as a DTC activation source (DTA = 1), the interrupt request flag is cleared automatically by the DMA transfer. With ADI, TXI, and RXI interrupts, however, the interrupt source flag is not cleared unless the relevant register is accessed in a DMA transfer. If the same interrupt is used as an activation source for more than one channel, the interrupt request flag is cleared when the highest- priority channel is activated. Transfer requests for other channels are held pending in the DMAC, and activation is carried out in order of priority. When DTE = 0 after completion of a transfer, an interrupt request from the selected activation source is not sent to the DMAC, regardless of the DTA bit setting. In this case, the relevant interrupt request is sent to the CPU or DTC. When an interrupt request signal for DMAC activation is also used for an interrupt request to the CPU or DTC activation (DTA = 0), the interrupt request flag is not cleared by the DMAC. If the DMAC is activated by a USB interrupt source, setting bits DTF[3:0] in DMACR to 4'b0011 and the USBDRQE bit in PFCR3 to 1 activates the DMAC at a low-level input of the USB interrupt signal. The DMAC stands by for a transfer request while the USB interrupt source is held high. While the USB interrupt source is held low, transfers continue in succession, with the bus being released each time a byte or word is transferred. If the USB interrupt source goes high in the middle of a transfer, the transfer is interrupted and the DMAC stands by for a transfer request. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |