| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/2462 bảng dữ liệu(PDF) 625 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2462 bảng dữ liệu(HTML) 625 Page - Renesas Technology Corp |
|
625 / 1250 page ![]() Section 17 Synchronous Serial Communication Unit (SSU) Rev. 2.00 Aug. 20, 2008 Page 577 of 1198 REJ09B0403-0200 Before switching transmission mode (TE = 1) or reception mode (RE = 1) to transmission/reception mode (TE = RE = 1), clear the TE and RE bits to 0. When starting the transfer, confirm that the TEND, RDRF, and ORER bits are cleared to 0 before setting the TE or RE bit to 1. Yes Start Initial setting [1] [2] [1] Initial setting: Specify the transmit/receive data format. [2] Check the SSU state and write transmit data: Write transmit data to SSTDR after reading and confirming that the TDRE bit in SSSR is 1. The TDRE bit is automatically cleared to 0 and transmission/ reception is started by writing data to SSTDR. [3] Check the SSU state: Read SSSR confirming that the RDRF bit is 1. A change of the RDRF bit (from 0 to 1) can be notified by RXI interrupt. [4] Receive error processing: When a receive error occurs, execute the designated error processing after reading the ORER bit in SSSR. After that, clear the ORER bit to 0. While the ORER bit is set to 1, transmission or reception is not resumed. [5] Procedure for consecutive data transmission/reception: To continue serial data transmission/reception, confirm that the TDRE bit is 1 meaning that SSTDR is ready to be written to. After that, data can be written to SSTDR. The TDRE bit is automatically cleared to 0 by writing data to SSTDR. [4] [5] [3] Transmission/reception started (TE = 1, RE = 1) Read TDRE in SSSR. TDRE = 1? Yes Yes Yes No No No No Write transmit data to SSTDR TDRE automatically cleared Data transferred from SSTDR to SSTRSR TDRE set to 1 to start transmission Read SSSR RDRF = 1? ORER = 1? Read receive data in SSRDR RDRF automatically cleared Consecutive data transmission/reception? Clear TEND in SSSR to 0 Clear TE and RE in SSER to 0 Error processing End transmission/reception Note: Hatching boxes represent SSU internal operations. Figure 17.9 Flowchart Example of Simultaneous Transmission/Reception (SSU Mode) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |