| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
M38K04F2 bảng dữ liệu(PDF) 205 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M38K04F2 bảng dữ liệu(HTML) 205 Page - Renesas Technology Corp |
|
205 / 328 page ![]() 2.7 A/D converter Rev.2.00 Oct 05, 2006 page 76 of 111 38K0 Group REJ09B0337-0200 APPLICATION 2.7.4 Notes on A/D converter (1) Analog input pin Make the signal source impedance for analog input low, or equip an analog input pin with an external capacitor of 0.01 µF to 1 µF. Further, be sure to verify the operation of application products on the user side. q Reason An analog input pin includes the capacitor for analog voltage comparison. Accordingly, when signals from signal source with high impedance are input to an analog input pin, charge and discharge noise generates. This may cause the A/D conversion precision to be worse. (2) Clock frequency during A/D conversion The comparator consists of a capacity coupling, and a charge of the capacity will be lost if the clock frequency is too low. Thus, make sure the following during an A/D conversion. • f(XIN) is 500 kHz or more • Do not execute the STP instruction |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |