 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
M306V2EEFS bảng dữ liệu(PDF) 215 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M306V2EEFS bảng dữ liệu(HTML) 215 Page - Renesas Technology Corp |
|
|
215 / 271 page  Rev.1.40 Oct 06, 2004 page 215 of 269 M306V2ME-XXXFP, M306V2EEFP (4) Border The border is output in the OSDS/P mode. The all bordered (bordering around of character font) and the shadow bordered (bordering right and bottom sides of character font) are selected (refer to Figure 2.16.34) by bit 2 of the OSD control register 1 (refer to Figure 2.16.3). The ON/OFF switch for borders can be controlled in block units by bits 0 to 2 of the block control register i (refer to Figure 2.16.4). The OUT1 signal is used for border output. The border color is fixed at color palette 8 (block). The border color for each screen is specified by the border color register i. The horizontal size (x) of border is 1TC (OSD clock cycle divided in the pre-divide circuit) regardless of the character font dot size. However, only when the pre-divide ratio = 2 and character size = 1.5TC, the horizontal size is 1.5TC. The vertical size (y) different depending on the screen scan mode and the vertical dot size of character font. Notes 1 : The border dot area is the shaded area as shown in Figure 2.16.36. 2 : When the border dot overlaps on the next character font, the character font has priority (refer to Figure 2.16.37 A). When the border dot overlaps on the next character back ground, the border has priority (refer to Figure 2.16.37 B). 3 : The border in vertical out of character area is not displayed (refer to Figure 2.16.38). Figure 2.16.34 Example of border display Figure 2.16.35 Horizontal and vertical size of border All bordered Shadow bordered y x 1/2H 1H, 2H, 3H 1/2H, 1H, 2H, 3H 1/2H 1H 1H Vertical dot size of character font Border dot size Scan mode Horizontal size (x) Vertical size (y) Normal scan mode Bi-scan mode 1TC (OSD clock cycle divided in pre-divide circuit) 1.5TC when selecting 1.5TC for character size. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
