STM32L443CC datasheet(196/215 Pages) STMICROELECTRONICS

tên linh kiện	STM32L443CC

Giải thích chi tiết về linh kiện	Ultra-low-power Arm® Cortex®-M4 32-bit MCUFPU, 100DMIPS, 256KB Flash, 64KB SRAM, USB FS, LCD, analog, audio, AES

PDF	215 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

196 / 215 page

Package information

STM32L443CC STM32L443RC STM32L443VC

196/215

DS11421 Rev 4

Device marking

The following figure gives an example of topside marking orientation versus ball A1 identifier

location.

Other optional marking or inset/upset marks, which identify the parts throughout supply

chain operations, are not indicated below.

Figure 53. UFBGA64 marking (package top view)

1. Parts marked as ES or E or accompanied by an Engineering Sample notification letter are not yet qualified

and therefore not approved for use in production. ST is not responsible for any consequences resulting

from such use. In no event will ST be liable for the customer using any of these engineering samples in

production. ST’s Quality department must be contacted prior to any decision to use these engineering

samples to run a qualification activity.

Stencil thickness

Between 0.100 mm and 0.125 mm

Pad trace width

0.100 mm

Table 97. UFBGA64 recommended PCB design rules (0.5 mm pitch BGA) (continued)

Dimension

Recommended values

STM32L443CC bảng dữ liệu(PDF) 196 Page - STMicroelectronics