| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC16F15213T-I/ST bảng dữ liệu(PDF) 190 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F15213T-I/ST bảng dữ liệu(HTML) 190 Page - Microchip Technology |
|
190 / 439 page ![]() Figure 21-11. Rising Edge Triggered Monostable Mode Timing Diagram (MODE = ‘b10001) Rev. 10-000203B 3/6/2019 TMRx_clk ON TxPR TxTMR BSF BCF 5 0 1 2 3 4 5 0 1 TMRx_postscaled TMRx_ers 2 3 4 5 0 PWM Duty Cycle 3 PWM Output Instruction(1) Note: 1. BSF and BCF represent Bit-Set File and Bit-Clear File instructions executed by the CPU to set or clear the ON bit of TxCON. CPU execution is asynchronous to the timer clock input. BSF BCF BSF 1 2 3 4 5 0 21.8.10 Level Triggered Hardware Limit One Shot Modes The Level Triggered Hardware Limit One Shot modes hold the timer in Reset on an external Reset level and start counting when both the ON bit is set and the external signal is not at the Reset level. If one of either the external signal is not in Reset or the ON bit is set, then the other signal being set/made active will start the timer. Reset levels are selected as follows: • Low Reset level (MODE = ‘b10110) • High Reset level (MODE = ‘b10111) When the timer count matches the TxPR period count, the timer is reset and the ON bit is cleared. When the ON bit is cleared by either a TxPR match or by software control, the timer will stay in Reset until both the ON bit is set and the external signal is not at the Reset level. When Level Triggered Hardware Limit One Shot modes are used in conjunction with the CCP PWM operation, the PWM drive goes active with either the external signal edge or the setting of the ON bit, whichever of the two starts the timer. Figure 21-12. Level Triggered Hardware Limit One Shot Mode Timing Diagram (MODE = ‘b10110) Rev. 10-000 204B 3/6/201 9 TMRx_clk Instruction (1) ON TxPR TxTMR BSF BSF 5 0 1 2 3 4 5 0 1 TMRx_postscaled TMRx_ers 2 1 2 0 PWM Duty Cycle D3 PWM Output Note: 1. BSF andBCF represent Bit-Set File and Bit-Clear File instructions executed by the CPU to set or clear the ON bit of TxCON. CPU execution is asynchronous to the timer clock input. 3 3 4 5 0 BSF BCF PIC16F15213/14/23/24/43/44 TMR2 - Timer2 Module © 2020-2022 Microchip Technology Inc. and its subsidiaries Data Sheet DS40002195E-page 190 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |