G–46

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

G

T Series

Subminiature Rocker Switches

Models Available

Features/Benefits

• Compact size—small footprint

• Single and double pole models

• PC and panel mounting options available

• RoHS compliant

Typical Applications

• Telecommunications

• Instrumentation

• Medical Equipment

Specifications

CONTACT RATING: Q contact material (TX01 models): 3 AMPS @

120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or

28 V DC. See page G-49 for additional ratings.

ELECTRICAL LIFE: TX01 models: 60,000 make-and-break

cycles at full load. All other models: 30,000 cycles.

CONTACT RESISTANCE: Below 20 m Ω typ. initial @

2–4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109 Ω min.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

NOTE: Any models supplied with B, G, P, Q or R contact material are RoHS compliant.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Materials

CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or

diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame

retardant, heat stabilized.

ACTUATOR: Nylon, black standard.

BUSHING: Brass, nickel plated.

HOUSING: Stainless steel.

SWITCH SUPPORT: Brass, matte-tin plated.

MOUNTING BRACKET: Stainless steel.

END CONTACTS: B contact material: Copper alloy, with gold plate

over nickel plate. Q contact material: Coin silver, silver plated.

See page G-49 for additional contact materials.

CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper alloy,

silver plated. See page G-49 for additional contact materials.

TERMINAL SEAL: Epoxy.

HARDWARE: Nut, Screws & Lockwasher: Stainless steel.

Standoff: Nylon standard.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages G-46 through G-50. For additional options not shown in catalog, consult Customer Service Center.

All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function

T101 SP On-None-On

T102 SP Off-None-On

T103 SP On-Off-On

T105 SP Mom.-Off-Mom.

T107 SP On-Off-Mom.

T201 DP On-None-On

T205 DP Mom.-Off-Mom.

Actuator

J1 Rocker, .300” wide

J6 Rocker, .230” wide

Terminations

A Right angle, PC thru-hole

AV Vertical Right angle, PC thru-hole

Z Solder lug

V3 V-bracket

Contact Material

B Gold

P Gold, matte-tin

Q Silver

G Gold over silver

R Gold over silver, matte-tin

Seal

E Epoxy

Actuator Color

2 Black