| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST7LITE39 bảng dữ liệu(PDF) 163 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7LITE39 bảng dữ liệu(HTML) 163 Page - STMicroelectronics |
|
163 / 167 page ![]() ST7LITE3 163/167 16 KNOWN LIMITATIONS 16.1 CLEARING ACTIVE INTERRUPTS OUTSIDE INTERRUPT ROUTINE When an active interrupt request occurs at the same time as the related flag or interrupt mask is being cleared, the CC register may be corrupted. Concurrent interrupt context The symptom does not occur when the interrupts are handled normally, i.e. when: – The interrupt request is cleared (flag reset or in- terrupt mask) within its own interrupt routine – The interrupt request is cleared (flag reset or in- terrupt mask) within any interrupt routine – The interrupt request is cleared (flag reset or in- terrupt mask) in any part of the code while this in- terrupt is disabled If these conditions are not met, the symptom can be avoided by implementing the following se- quence: Perform SIM and RIM operation before and after resetting an active interrupt request Ex: SIM reset flag or interrupt mask RIM 16.2 LINSCI LIMITATIONS 16.2.1 LINSCI wrong break duration SCI Mode A single break character is sent by setting and re- setting the SBK bit in the SCICR2 register. In some cases, the break character may have a long- er duration than expected: - 20 bits instead of 10 bits if M=0 - 22 bits instead of 11 bits if M=1. In the same way, as long as the SBK bit is set, break characters are sent to the TDO pin. This may lead to generate one break more than expect- ed. Occurrence The occurrence of the problem is random and pro- portional to the baudrate. With a transmit frequen- cy of 19200 baud (fCPU=8MHz and SCI- BRR=0xC9), the wrong break duration occurrence is around 1%. Workaround If this wrong duration is not compliant with the communication protocol in the application, soft- ware can request that an Idle line be generated before the break character. In this case, the break duration is always correct assuming the applica- tion is not doing anything between the idle and the |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |