 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
VSC7440 bảng dữ liệu(PDF) 259 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC7440 bảng dữ liệu(HTML) 259 Page - Microsemi Corporation |
|
|
259 / 444 page  Functional Descriptions VMDS-10492 VSC7440 Datasheet Revision 4.2 242 The following TTI parameters can be used as part of the TUPE criteria: • PORT_NUM • QU_NUM • TUPE_CTRL The parameters prefixed "CMD" specify the commands, which are applied to any TTIs, which fulfill the TUPE criteria. Using the TUPE command parameters, the following TTI parameters can be changed: •TIMER_ENA Timers can be enabled/disabled. • PORT_NUM Injections can be moved to a different port. • QU_NUM Injections can be moved to a different queue. While TUPE is running no injections will be performed for any TTIs which match the configured TUPE criteria and fall within the configured TUPE address range. The TUPE_CTRL field in the TTI Table can be used to classify TTIs into different groups, such that a TUPE command can easily address all TTIs within such group. The following illustration depics the AFI TUPE functionality. TUPE_MISC CRIT_QU_NUM_ENA Enable use of CRIT_QU_NUM_VAL. 1 TUPE_MISC CMD_TIMER_ENA_ENA Enable use of CMD_TIMER_ENA_VAL. 1 TUPE_MISC CMD_TIMER_ENA_VAL TUPE command parameter: New TIMER_ENA value. 1 TUPE_MISC CMD_PORT_NUM_ENA Enable use of CMD_PORT_NUM_VAL. 1 TUPE_MISC CMD_QU_NUM_ENA Enable use of CMD_QU_NUM_VAL. 1 TUPE_ADDR TUPE_START_ADDR First address in TTI table for AFI TUPE to process. 1 TUPE_ADDR TUPE_END_ADDR Last address in TTI table for AFI TUPE to process. 1 TUPE_CRIT1 CRIT_PORT_NUM_VAL TUPE criteria parameter controlling which TTI table entries to update. 1 TUPE_CRIT1 CRIT_QU_NUM_VAL TUPE criteria parameter controlling which TTI table entries to update. 1 TUPE_CRIT2 CRIT_TUPE_CTRL_MASK TUPE criteria parameter controlling which TTI table entries to update. 1 TUPE_CRIT3 CRIT_TUPE_CTRL_VAL TUPE criteria parameter controlling which TTI table entries to update. 2 TUPE_CMD1 CMD_PORT_NUM_VAL TUPE command parameter: New PORT_NUM value. 1 TUPE_CMD1 CMD_QU_NUM _VAL TUPE command parameter: New QU_NUM value. 1 Table 168 • AFI TUPE Registers Overview (continued) AFI:TUPE Register Field Description Replication |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
