STM32L4A6VG datasheet(132/282 Pages) STMICROELECTRONICS

tên linh kiện	STM32L4A6VG

Giải thích chi tiết về linh kiện	Ultra-low-power Arm® Cortex®-M4 32-bit MCUFPU, 100DMIPS, 1MB Flash, 320KB SRAM, USB OTG FS, audio, AESHASH, ext. SMPS

PDF	282 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

132 / 282 page

Electrical characteristics

STM32L4A6xG

132/282

DS11584 Rev 8

6.3.5

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 23: Current consumption

measurement scheme with and without external SMPS power supply.

Typical and maximum current consumption

The MCU is placed under the following conditions:

•

All I/O pins are in analog input mode

•

All peripherals are disabled except when explicitly mentioned

•

The Flash memory access time is adjusted with the minimum wait states number,

depending on the fHCLK frequency (refer to the table “Number of wait states according

to CPU clock (HCLK) frequency” available in the RM0351 reference manual).

•

When the peripherals are enabled fPCLK = fHCLK

The parameters given in Table 26 to Table 49 are derived from tests performed under

ambient temperature and supply voltage conditions summarized in Table 22: General

operating conditions.

STM32L4A6VG bảng dữ liệu(PDF) 132 Page - STMicroelectronics