AM652X datasheet(122/299 Pages) TI1

122 / 299 page

122

AM6548, AM6528, AM6546

AM6526, AM6527

SPRSP08E – NOVEMBER 2017 – REVISED OCTOBER 2018

www.ti.com

Submit Documentation Feedback

Product Folder Links: AM6548 AM6528 AM6546 AM6526 AM6527

Specifications

NOTE

The interfaces or signals described in Table 5-3 through Table 5-9 correspond to the

interfaces or signals available in multiplexing mode 0 (Primary Function).

All interfaces or signals multiplexed on the balls described in these tables have the same DC

electrical characteristics, unless multiplexing involves a PHY and GPIO combination, in

which case different DC electrical characteristics are specified for the different multiplexing

modes (Functions).

Table 5-3. I2C OPEN DRAIN DC Electrical Characteristics

over recommended operating conditions (unless otherwise noted)

PARAMETER

MIN

TYP

MAX

UNIT

BALL NAMES in Mode 0: WKUP_I2C0_SCL / WKUP_I2C0_SDA / MCU_I2C0_SCL / MCU_I2C0_SDA

BALL NUMBERS: AC7 / AD6 / AD7 / AD8

I2C STANDARD MODE / FAST MODE - VDDSHV0_WKUP = 1.8 V

VIH

High-level input threshold

0.7 ×

VDDSHV0_WKUP

VIL

Low-level input threshold

0.3 ×

VDDSHV0_WKUP

VHYS

Hysteresis

0.1 ×

VDDSHV0_WKUP

IIN

Input leakage current. This value represents the

maximum current flowing in or out of the pin while the

output driver is disabled and the input is swept from VSS

to VDD.

µA

IOZ

Total leakage current through the driver/receiver

combination, which may include an internal pull-up or

pull-down. This value represents the maximum current

flowing in or out of the pin while the output driver is

disabled, the pull-up or pull-down is inhibited, and the

input is swept from VSS to VDD.

µA

VOL

Low-level output voltage at 3-mA sink current

0.2 ×

VDDSHV0_WKUP

I2C STANDARD MODE / FAST MODE - VDDSHV0_WKUP = 3.3 V

VIH

High-level input voltage

0.7 ×

VDDSHV0_WKUP

VIL

Low-level input voltage

0.3 ×

VDDSHV0_WKUP

VHYS

Hysteresis

0.05 ×

VDDSHV0_WKUP

IIN

Input leakage current. This value represents the

maximum current flowing in or out of the pin while the

output driver is disabled and the input is swept from VSS

to VDD.

µA

IOZ

Total leakage current through the driver/receiver

combination, which may include an internal pull-up or

pull-down. This value represents the maximum current

flowing in or out of the pin while the output driver is

disabled, the pull-up or pull-down is inhibited, and the

input is swept from VSS to VDD.

µA

VOL

Low-level output voltage at 3-mA sink current

0.4

(1) VDDS in this table stands for corresponding power supply. For more information on the power supply name and the corresponding ball,

see Table 4-1, POWER [9] column.

AM652X bảng dữ liệu(PDF) 122 Page - Texas Instruments

AM652X bảng dữ liệu(HTML) 122 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL