| nhà sản xuất | tên linh kiện | bảng dữ liệu | Giải thích chi tiết về linh kiện |

STMicroelectronics
|
M50FLW080A |
534Kb/64P |
8 Mbit (13 x 64KByte Blocks + 3 x 16 x 4KByte Sectors), 3V Supply Firmware Hub / Low Pin Count Flash Memory |
| STEVAL-CCA012V1 |
107Kb/4P |
3 W filter-free class-D audio amplifier demonstration board with 6-12 dB fixed gain select based on the TS2007 |
| M24LR64-R_1004 |
1Mb/126P |
64 Kbit EEPROM with password protection & dual interface: 400kHz I짼C serial bus & ISO 18000-3 mode 1 RF protocol at 13.56MHz |
| M50FLW040A |
857Kb/52P |
4 Mbit (5 x 64KByte Blocks + 3 x 16 x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory |
| LRIS2K |
575Kb/98P |
2048-bit EEPROM tag IC at 13.56 MHz, with 64-bit UID and Password, ISO15693 and ISO18000-3 Mode 1 compliant |
| STD4N80K5 |
1Mb/23P |
N-channel 800 V, 2.1 ??typ., 3 A MDmesh??K5 Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages February 2015 Rev 3 |
| M24LR64-R |
936Kb/126P |
64 Kbit EEPROM with password protection & dual interface: 400kHz I짼C serial bus & ISO 18000-3 mode 1 RF protocol at 13.56MHz |
| STD3NK90ZT4 |
563Kb/24P |
N-channel 900 V, 3.6 Ω typ., 3 A SuperMESH™ Power MOSFETs in DPAK, TO-220 and TO-220FP packages Rev 3 - August 2018 |
| STEVAL-TLL006V2 |
255Kb/4P |
New high-power LED driver demo board for single flash with I짼C interface based on STCF06 (with motherboard based on 쨉PSD) March 2012 Rev 1 |
| STD3NK90ZT4 |
662Kb/20P |
N-channel 900 V, 4.1 廓 typ., 3 A Zener-protected SuperMESH??Power MOSFET in DPAK, TO-220 and TO-220FP packages January 2013 Rev 2 |
| ST7262 |
1Mb/139P |
LOW SPEED USB 8-BIT MCU WITH 3 ENDPOINTS, FLASH OR ROM MEMORY, LVD, WDG, 10-BIT ADC, 2 TIMERS, SCI, SPI |
| LRI64 |
523Kb/52P |
Memory TAG IC at 13.56 MHz, with 64-bit Unique ID and WORM user area, ISO15693 and ISO18000-3 Mode 1 compliant |
| STM32F318C8 |
1Mb/125P |
ARM-based Cortex-M4 32-bit MCU+FPU, 64 KB Flash, 16 KB SRAM, ADC, DAC, 3 COMP, Op-Amp, 1.8 V |
| STM8S001J3 |
1Mb/84P |
16 MHz STM8S 8-bit MCU, 8-Kbyte Flash memory, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I2C June 2017 Rev 2 |
| ST7262 |
1Mb/132P |
LOW SPEED USB 8-BIT MCU WITH 3 ENDPOINTS, FLASH OR ROM MEMORY, LVD, WDG, 10-BIT ADC, 2 TIMERS, SCI, SPI June 2003 Rev. 2.2 |
| STM8S003F3P6TR |
956Kb/100P |
Value line, 16 MHz STM8S 8-bit MCU, 8 Kbytes Flash, 128 bytes data EEPROM, 10-bit ADC, 3 timers, UART, SPI |
| STM8S001J3 |
1Mb/84P |
16 MHz STM8S 8-bit MCU, 8-Kbyte Flash memory, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I2C August 2020 |
| STM8S103K3T6C |
1Mb/117P |
Access line, 16 MHz STM8S 8-bit MCU, up to 8 Kbytes Flash, data EEPROM,10-bit ADC, 3 timers, UART, SPI, I짼C |
| STM32F103ZCH6 |
1Mb/130P |
High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces |
| STM32F103ZEH6 |
1Mb/130P |
High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces |