1. Product Overview:

️· Product: Axial Molded Inductors (AM20 Series)
️· Manufacturer: Allied Components International
️· Website: www.alliedcomponents.com
️· Revision Date: 10/20/10

2. Physical Characteristics & Dimensions:

️· Dimensions (in inches/mm): 0.095 ± 0.01 / 2.41 ± 0.25 (This likely refers to a key dimension, perhaps diameter or length.)

3. Electrical Specifications:

️· Inductance Range: 0.022 µH to 1000 µH
️· Tolerance: 10% (Tighter tolerances are available, implying options beyond the standard)
️· Rated Current: Based on Inductance (The datasheet doesn't provide specific current ratings for each inductor; it's dependent on the inductance value.)
️· Operating Temperature: -55°C to +125°C
️· Dielectric Strength: 1000 Volts RMS at sea level
️· Testing Procedures:
- Inductance (L) and Quality Factor (Q) measured with a Hewlett-Packard (HP) 4342A Q-Meter.
- DC Resistance (DCR) measured on a CH-301.
- Self-Resonant Frequency (SRF) measured using HP-4191A and HP4291B equipment.

4. Part Number and Performance Table (Combined from both pages):

This table lists specific part numbers and their key performance characteristics. *Note: The format may be slightly inconsistent between the two "pages," but I'm attempting to merge the information.*

Allied Part Number	Inductance (µH)	Tolerance (%)	Q (Min)	Test Freq. (MHz)	SRF (Min) (MHz)	DCR (Max) (Ω)	Rated Current (mA)
AM20-102K-RC	270	10	30	0.79	8.0	25.0	47
AM20-271K-RC	330	10	30	0.79	7.0	28.0	45
AM20-331K-RC	390	10	30	0.79	6.5	35.0	40
AM20-391K-RC	470	10	30	0.79	6.0	42.0	36
AM20-471K-RC	560	10	30	0.79	5.0	46.0	35
AM20-561K-RC	680	10	30	0.79	4.2	60.0	30
AM20-681K-RC	820	10	30	0.79	3.8	65.0	29
AM20-821K-RC	1000	10	30	0.79	3.4	72.0	28

5. Packaging and Marking:

️· Packaging: Available in bulk (1000 pieces per bag) or on reels (5000 pieces per reel). "TR" suffix indicates tape and reel packaging.
️· Marking: Parts are marked with a 5-band color code, conforming to MIL-C-15305.

Important Notes:

️· Specifications Subject to Change: Allied Components International reserves the right to change specifications without notice.
️· Rated Current: The "Rated Current" column provides an indication of current handling capability for each inductor, but this is likely a maximum value and depends on the specific operating conditions.
️· Contact Information: For inquiries, contact Allied Components International at 714-665-1140.