1. Product Type:

️· The document describes headers/connectors, specifically for printed circuit boards (PCBs). These are likely edge connectors or similar.
️· Product lines mentioned: STL130, STL140, and STL132. The STL130 and STL132 are similar series, while STL140 appears to be a variant of the STL130. The use of "STL(Z)" suggests a possible variant.

2. Key Features/Specifications:

️· Dimensions: The document provides dimensional information in both millimeters and inches. Key dimensions mentioned are:
- Pin diameters: 1.0mm, 1.3mm
- Lengths: 5.50mm, 6.00mm, 11.80mm, 12.5mm, 15.00mm
️· Pin Counts: The document lists available pin counts ranging from 2 to 24.
️· "Z" Designation: A variant or special type (e.g., different plating, marking) possibly denoted with a "Z" suffix (STL(Z)).
️· Application Note: A note that "To insure proper pin positioning, install header into AK130 or AK132 Plug before soldering into board".

3. Series Breakdown (with available pin counts and lengths):

Series	Pin Count	Length (mm)	Length (in)
STL130	2	5.50	0.217
STL130	3	6.00	0.236
STL130	4	11.80	0.465
STL130	5	12.50	0.492
STL130	6	15.00	0.591
STL130	10	50.00	1.97
STL130	11	55.00	2.17
STL130	12	60.00	2.36
STL130	13	65.00	2.56
STL130	14	70.00	2.76
STL130	15	75.00	2.95
STL130	16	80.00	3.15
STL130	24	120.00	4.72
STL132	2	5.50	0.217
STL132	3	6.00	0.236
STL132	4	11.80	0.465
STL132	5	12.50	0.492
STL132	10	50.00	1.97
STL132	11	55.00	2.17
STL132	12	60.00	2.36
STL132	13	65.00	2.56
STL132	14	70.00	2.76
STL132	15	75.00	2.95
STL132	16	80.00	3.15
STL132	24	120.00	4.72
STL140	2	5.50	0.217
STL140	3	6.00	0.236
STL140	4	11.80	0.465
STL140	5	12.50	0.492
STL140	10	50.00	1.97
STL140	11	55.00	2.17
STL140	12	60.00	2.36
STL140	13	65.00	2.56
STL140	14	70.00	2.76
STL140	15	75.00	2.95
STL140	16	80.00	3.15
STL140	24	120.00	4.72

4. Company Information:

️· Altech Corp. is the manufacturer.
️· Contact information: 35 Royal Road • Flemington NJ 08822-6000; (908) 806-9400; (908) 806-9490

5. Additional Notes:

️· The document appears to be a product catalog or datasheet excerpt.
️· Numbers that appear struck-through likely indicate discontinued or obsolete part numbers.