1. Product Overview:

️· Type: Axial Molded Inductors (AM20 Series)
️· Manufacturer: Allied Components International
️· Website: www.alliedcomponents.com
️· Contact: 714-665-1140
️· Revision Date: October 20, 2010 (P G 2 O F 2)

2. Electrical Specifications:

️· Inductance Range: 0.022 µH to 1000 µH
️· Tolerance: 10% (Tighter tolerances available)
️· Operating Temperature: -55 °C to +125 °C
️· Dielectric Strength: 1000 Volts RMS at sea level
️· Rated Current: Based on inductance (Drop <10°C)
️· Test Procedures: L measured with HP4342A Q-Meter; DCR measured on CH-301; SRF measured on HP-4191A, HP4291B.

3. Physical Characteristics (from initial dimensions on page 1):

️· Dimensions: 0.095±0.01 inches (2.41±0.25 mm) - This likely refers to the body diameter, but exact dimensions would require a diagram.

4. Part Number Table (Combined Data from Both Pages - *Partial List*):

Allied Part Number	Inductance (µH)	Tolerance (%)	Q Min	Test Frequency (MHz)	SRF Min (MHz)	DCR Max (Ω)	Rated Current (mA)
AM20-102K-RC	270	10	30	.79	8.0	25.0	47
AM20-271K-RC	330	10	30	.79	7.0	28.0	45
AM20-331K-RC	390	10	30	.79	6.5	35.0	40
AM20-391K-RC	470	10	30	.79	6.0	42.0	36
AM20-471K-RC	560	10	30	.79	5.0	46.0	35
AM20-561K-RC	680	10	30	.79	4.2	60.0	30
AM20-681K-RC	820	10	30	.79	3.8	65.0	29
AM20-821K-RC	1000	10	30	.79	3.4	72.0	28

5. Packaging:

️· Bulk: 1000 pieces per bag
️· Reel: 5000 pieces per reel ("-TR" suffix denotes Tape and Reel packaging)

6. Marking:

️· 5-Band Color Code per MIL-C-15305

Important Note: This summary is based on the information provided in the document. For complete details and accuracy, refer to the original datasheet. Also, this is not a complete list of available part numbers - only those listed in the extract provided.